It’s felt like a strange summer here in the UK. Other than a couple of weeks that were hotter than we’ve ever been before, the rest of the summer has felt a bit meh. My solar panels say we’ve had a lot of sun, but I’ve barely sat outside at the patio table.
But it has been dry. Really dry. Hose pipe ban dry (by Autumn). I used all the water in the 200l waterbutt that the builders installed, and got very frustrated with its position.
I completely forgot to take a ‘before’ photo, so here’s one before everything grew up in front and around the side of it. They set the tap to point into the garden. By this point, that’s underneath a small Japanese maple, a reasonable amount of verbena bonariensis and a remarkable number of spiders. Not easy to get a watering can underneath and turn the tap, that’s for sure.
So when I got a bit of unexpected tax back (not working for a month does that), I splurged on two new waterbutts. It turns out that you don’t actually have to have those dark green barrels any more! A revelation.
I chose one waterbutt for the entirely untapped (heh) downpipe off the conservatory roof. I had to wait extra time for the sandstone colour (it also comes in granite and… um… something else), but I think you’ll agree it was absolutely worth it. That lid comes off, and there are two smallish tubs underneath that I’m eyeing up for tomatoes come early next year.
That is around 275l, if you don’t use the planters and can get to the water below the tap. As it happens, if we hadn’t wanted to use the planters the diverter would have been at a really awkward spot, pretty much directly on the kink in the downpipe. I’m guessing it holds something like 200-220l – I could do the maths, but I can’t be bothered!
The other waterbutt was chosen to replace the existing one, but bigger.
That picture probably gives you some idea how difficult it was to get to the tap on the previous one. I went with blue to match the shed (although that needs a bit of a repaint – next year). There’s a tap at an appropriate height for watering cans, and the hose attaches to the emptying point around the back. So I should be able to use all 380l from this one. Although it may not quite be 380l – due to the positioning of the previous diverter we had to put the diverter just a little lower than ideal, . It’s not far off though. It also has a large planter in the top, so I’ll be thinking about what to grow in there.
This was, I’m sure Clarkie will agree, an absolute ball-ache to fit. The fancy filter diverter didn’t come with any hose, and I’m not convinced it’s not too big for the downpipe. It did come with a holesaw and grommet, but the holesaw was 5mm smaller than the grommet. That’s a lot of extra material to ‘just use sandpaper’ to make it fit. The only way to attach the hose I bought to the diverter and the grommet was for me to basically climb into the planter and reach down through the holly(!!) behind, with a torch in my mouth because by the time we’d manage to get the grommet to fit it was dark. We had to finish because we were forecast a LOT of rain overnight, and leaving a disconnected hole in the downpipe wasn’t really an option. Today I have a lot of stiff muscles, scratches and bruises, but water is being stored!
I also had to empty the previous waterbutt to move it, so the garden got a really thorough soaking yesterday. The initial idea was to use the sandstone one to hold the water from the previous one, but we waited a week and the sandstone one is already full. The dry spell has definitely ended. It’s sort of tempting to chain the old one to the sandstone one, but it’s not very pretty and would be very visible in the conservatory. I’m not really sure what to do with it.
All told, I think that’s pretty close to 600 litres of water storage now. That’s 3 times what we had last summer. Fingers crossed that will help with the hot, dry summers of the future!



Leave a Reply